eagle_25.yml

# Define the system of units to use internally. 
InternalUnitSystem:
  UnitMass_in_cgs:     1.98848e43    # 10^10 M_sun in grams
  UnitLength_in_cgs:   3.08567758e24 # Mpc in centimeters
  UnitVelocity_in_cgs: 1e5           # km/s in centimeters per second
  UnitCurrent_in_cgs:  1             # Amperes
  UnitTemp_in_cgs:     1             # Kelvin

# Structure finding options
StructureFinding:
  config_file_name:     stf_input.cfg    # Name of the STF config file.
  basename:             ./stf         # Common part of the name of output files.
  output_time_format:   0             # Specifies the frequency format of structure finding. 0 for simulation steps (delta_step) and 1 for simulation time intervals (delta_time).
  scale_factor_first:   0.92          # Scale-factor of the first snaphot (cosmological run)
  time_first:           0.01        # Time of the first structure finding output (in internal units).
  delta_step:           1000          # Time difference between consecutive structure finding outputs (in internal units) in simulation steps.
  delta_time:           1.10          # Time difference between consecutive structure finding outputs (in internal units) in simulation time intervals.

# Cosmological parameters
Cosmology:
  h:              0.6777        # Reduced Hubble constant
  a_begin:        0.9090909     # Initial scale-factor of the simulation
  a_end:          1.0           # Final scale factor of the simulation
  Omega_m:        0.307         # Matter density parameter
  Omega_lambda:   0.693         # Dark-energy density parameter
  Omega_b:        0.0455        # Baryon density parameter
  
# Parameters governing the time integration
TimeIntegration:
  time_begin: 0.    # The starting time of the simulation (in internal units).
  time_end:   1e-2  # The end time of the simulation (in internal units).
  dt_min:     1e-10 # The minimal time-step size of the simulation (in internal units).
  dt_max:     1e-2  # The maximal time-step size of the simulation (in internal units).

# Parameters governing the snapshots
Snapshots:
  basename:            eagle # Common part of the name of output files
  scale_factor_first:  0.91  # Scale-factor of the first snaphot (cosmological run)
  time_first:          0.01  # Time of the first output (non-cosmological run) (in internal units)
  delta_time:          1.01  # Time difference between consecutive outputs (in internal units)

# Parameters governing the conserved quantities statistics
Statistics:
  scale_factor_first:  0.92 # Scale-factor of the first stat dump (cosmological run)
  time_first:          0.01 # Time of the first stat dump (non-cosmological run) (in internal units)
  delta_time:          1.05 # Time between statistics output

# Parameters for the self-gravity scheme
Gravity:
  eta:                    0.025    # Constant dimensionless multiplier for time integration. 
  theta:                  0.7     # Opening angle (Multipole acceptance criterion)
  comoving_softening:     0.0026994 # Comoving softening length (in internal units).
  max_physical_softening: 0.0007    # Physical softening length (in internal units).
  mesh_side_length:       64

# Parameters for the hydrodynamics scheme
SPH:
  resolution_eta:        1.2348   # Target smoothing length in units of the mean inter-particle separation (1.2348 == 48Ngbs with the cubic spline kernel).
  CFL_condition:         0.1      # Courant-Friedrich-Levy condition for time integration.
  minimal_temperature:   100      # (internal units)

# Parameters related to the initial conditions
InitialConditions:
  file_name:  ./EAGLE_ICs_25.hdf5    # The file to read
  periodic:   1
  cleanup_h_factors: 1               # Remove the h-factors inherited from Gadget
  cleanup_velocity_factors: 1        # Remove the sqrt(a) factor in the velocities inherited from Gadget