# Define the system of units to use internally. 
InternalUnitSystem:
  UnitMass_in_cgs:     1.98841e43    # 1e10 Msol  #2.0e33     # Solar masses
  UnitLength_in_cgs:   3.08567758e24 # Mpc        #3.0857e21  # Kiloparsecs
  UnitVelocity_in_cgs: 1.0e5      # Kilometers per second
  UnitCurrent_in_cgs:  1          # Amperes
  UnitTemp_in_cgs:     1          # Kelvin

# Parameters governing the time integration
TimeIntegration:
  time_begin: 0.    # The starting time of the simulation (in internal units).
  time_end:   5e-6  # The end time of the simulation (in internal units).
  dt_min:     1e-10 # The minimal time-step size of the simulation (in internal units).
  dt_max:     1e-8  # The maximal time-step size of the simulation (in internal units).

# Parameters governing the snapshots
Snapshots:
  basename:            snap/snapshot # Common part of the name of output files
  time_first:          0.         # Time of the first output (in internal units)
  delta_time:          1e-7       # Time difference between consecutive outputs (in internal units)

# Parameters governing the conserved quantities statistics
Statistics:
  delta_time:          1e-3 # Time between statistics output

Scheduler:
  tasks_per_cell: 64

# Parameters for the hydrodynamics scheme
SPH:
  resolution_eta:        1.2348   # Target smoothing length in units of the mean inter-particle separation (1.2348 == 48Ngbs with the cubic spline kernel).
  CFL_condition:         0.1      # Courant-Friedrich-Levy condition for time integration.
  minimal_temperature: 100.       # Kelvin
  
# Parameters related to the initial conditions
InitialConditions:
  file_name:  ./coolingBox.hdf5     # The file to read
  periodic:   1
  
# Dimensionless pre-factor for the time-step condition
LambdaCooling:
  lambda_nH2_cgs:              1e-22 # Cooling rate divided by square Hydrogen number density (in cgs units [erg * s^-1 * cm^3])
  cooling_tstep_mult:          1.0        # Dimensionless pre-factor for the time-step condition

# Cooling with Grackle 3.0
GrackleCooling:
  cloudy_table: CloudyData_UVB=HM2012.h5       # Name of the Cloudy Table (available on the grackle bitbucket repository)
  with_UV_background: 0                        # Enable or not the UV background
  redshift: 0                                  # Redshift to use (-1 means time based redshift)
  with_metal_cooling: 0                        # Enable or not the metal cooling
  max_steps: 10000                             # (optional) Max number of step when computing the initial composition
  convergence_limit: 1e-2                      # (optional) Convergence threshold (relative) for initial composition
  thermal_time_myr: 5                          # (optional) Time (in Myr) for adiabatic cooling after a feedback event.
  self_shielding_method: 0                     # (optional) Grackle (1->3 for Grackle's ones, 0 for none and -1 for GEAR)
  self_shielding_threshold_atom_per_cm3: 0.007 # Required only with GEAR's self shielding. Density threshold of the self shielding
  HydrogenFractionByMass : 1.                  # Hydrogen fraction by mass (default is 0.76)
  use_radiative_transfer : 1                   # Arrays of ionization and heating rates are provided
  RT_heating_rate_cgs        : 1.65117e-17     # heating         rate in units of / nHI_cgs (corresponding to a flux of 10^12 photons s−1 cm−2 , with a 10^5 K blackbody spectrum)
  RT_HI_ionization_rate_cgs  : 1.63054e-06     # HI ionization   rate in cgs [1/s]          (corresponding to a flux of 10^12 photons s−1 cm−2 , with a 10^5 K blackbody spectrum)
  RT_HeI_ionization_rate_cgs : 0               # HeI ionization  rate in cgs [1/s]
  RT_HeII_ionization_rate_cgs: 0               # HeII ionization rate in cgs [1/s]
  RT_H2_dissociation_rate_cgs: 0               # H2 dissociation rate in cgs [1/s]
  maximal_density_Hpcm3:  -1                   # Maximal density (in hydrogen atoms/cm^3) for cooling. Higher densities are floored to this value to ensure grackle works properly when interpolating beyond the cloudy_table maximal density. A value < 0 deactivates this parameter.
  

GEARChemistry:
  initial_metallicity: 0.01295



GEARPressureFloor:
  jeans_factor: 0.       # Number of particles required to suppose a resolved clump and avoid the pressure floor.

